Why has the enamel crawled in from the edges? This is because the piece is almost certainly over fired (example right); to combat this problem you must reduce the temperature and/or the firing time. If you are using a torch for firing, the flame has enveloped the piece. Try holding the torch further away so that the flame hits the back of the blank and forms a 45° angle.
- Home
- Jewellery Enamelling
- Transparent Leadfree Jewellery Enamels
- Opaque Leadfree Jewellery Enamels
- Wet Process Leadfree Enamels on Steel Supplied in Liquid Form
- Wet Process Enamels on Copper in Liquid Form
- Wet Process Leadfree Enamels on Steel Supplied in Dry Form
- Wet Process Enamels on Copper in Dry Form
- Leadfree Enamel Painting Colours
- Services
- Vitreous Enamel
- Contact
